uBMC software release note 1.1.0.4 Release 1. Added a command to remove SSH host keys as "ssh host-key remove " 2. Fixed a bug related to IPV6 address not working between VNOS and uBMC. 3. Fixed RTC Battery leak issue. 4. Allowed non-secure BIOS upgrade for non-ATT vendor. 1.1.0.2 Release 1. Added BIOS backup/restore support to prevent BIOS update failure. 2. Added a command to show system upgrade status. 3. Forbid BIOS upgrade with an un-signed image. 4. Forbid normal user to operate phonehome and BIOS upgrade. 5. Fixed web UI abnormal after BIOS upgrade via in-band port. 6. Fixed an issue when "show management state". 1.1.0.1 Release 1. Added BIOS upgrade support for H2O based host systems. 2. Fixed several issues with upload via web. Including configuration and image upload 3. Fixed several CLI use of language. 4. Forbid timeout for raidius and TACACS to be 0. 5. Forbid VRF to be deleted while still inuse. 6. Fixed several "show running-config" result around ip configuration 7. Fixed an issue ssh can't connect after regenerate SSH key. 8. Fixed an issue where Admin user can't change full name 1.1.0.0 Release 1. Added web based system serial console. 2. Moved code base to githgub open repository. 1.0.1.1 Release 1. Removed default ntp server configuration. Fixed a bug where ntp default server can't be removed. 2. Added reset password only option in recovery mode. 3. Extended time for the user to respond the recovery options. The time needed to type the password is unchanged though. 4. Fixed LED issue in vecpe-large systems. 1.0.1.0 Release 1. Added a password reset mechanism via serial console for recovering admin access. 2. A FAN-2 is removed from the XS system, removing it from GUI and CLI. no in use 3. Fixed an issue where upgrade will fail (the box will fail to boot) if upgrade ssh connection is interrupted. Now upgrade with ssh will finish in background if connection is lost. 4. Some wording change in CLI ntp related commands. AT&T: 1. Disabled phonehome client by default. Can still be turned on in command line interface. 1.0.0.4 Release 1. Added warning messages in both CLI and GUI when the system eeprom content is invalid 2. Improved RTC sync logic in S/M/L system 3. Improved time keeping for XS 4. Added support for IPMI SEL time get/set. Useful for sync time from host to uBMC 5. Fixed a problem in SD card installation for manufacturing process. 1.0.0.3 Release 1. Added DHCP lease status in CLI/GUI 2. Fixed a bug where DHCP default gateway offering is not honored. 3. Enabled traceroute with interface for non-root users. 1.0.0.2 Release 1. Fixed an issue where ipv6 address does not take effect immediately. 2. Fixed a bug where default gateway is lost when ip address is changed but subnet is not changed. 3. Fixed an issue where the i2c of the host bus is blocked 4. Removed certain unneeded SNMP configuration GUI 5. Updated themo control logic for 80500-0180-G10/80500-0179-G10 or ATT-V450/ATT-V250 systems, added power-off when overheat. 1.0.0.0 Release 1. Added default VRF/iptables configuration for ATT vendor 2. Disabled BIOS upgrade due to secureboot support for ATT vendor 3. Fixes with S/M/L fan speed reading. 4. Changed S/M/L thermo parameters 5. Moved to use product P/N to determine product type. 6. Added support for scp ISO images into the uBMC for host OS upgrade 7. Fixed cdrom ISO upload rename issue.A 8. Fixed ipv6 neighbour discovery on in-band interface Notes: 1. After upgrade to this release, a configuration reset is needed. 2. In the ATT's default VRF configuration, the serial console CLI will not have network access. This is a know limitation, and ATT is aware of this. 0.9.0.3 Release 1. Added SILICOM vendor support in 0.9.0.3 2. Added iptable commands support for simple firewall feature in 0.9.0.3. 3. Added support for S/M/L model 4. Added fan control for S/M/L model 5. New phonehome client iplementation based ATT's suggestion. 0.9.0.0 Release This a full featured uBMC release aimed for integration testing. New features added since last release 1. Dying Gasp. Support sending SNMP traps through INBAND or OUTBAND interfaces or secure IPSec tunnels when loose power. 2. NETCONF. Support configuration through the YANG model. 3. Full GUI/CLI IPSect tunnel management, based on StrongSWAN 4. IPMI SEL support 5. FULL VRF support. Services can now be isolated to VRF table. 6. Host BIOS offline update support. Currently only coreboot BIOS 7. Phone home client support. Not enabled by default 8. Staging area firmware installation support. MANFUCATURE image. 9. Common network command access via CLI. 10. Support for coreboot PXE boot wait protocol. Bug fixes 1. Fixed conflicts between serial console and SoL 2. Fixes with IPMI SDR. 3. Fixed IPMItool unsupported command, respond with proper error. Outstanding features 1. BIOS upgrade for Blinkboot BIOS 2. PXE boot wait protocol for Blinkboot BIOS 3. Enabling phone home client by default after the integration test. 4. uBMC status LED. 0.5.0.3_R1 release Patch release for 0.5.0.3, fixes an issue with serial console CR/LF character conversion. 0.5.0.3 release 1. Initial support of out of band interface on uBMC. Sometimes we still see link not coming up, may need the host to enable the interface. See known_issues_0.5.0.3.txt for detail 2. Fixed the length issue when working with host ipmitool, now standard ipmitool can be used. Still limited to sdr,sensors. SEL is not supported yet. 3. Support of VLAN 4088 on inband interface 4. IPV6 and VRF tools in root login - CLI commands are not ready yet. 5. show running config - (ipsec commands not supported yet). 6. Support for more ipsec configuration options in CLI/GUI 7. uBMC is now able to reset/power off/on the host. 8. Additional ipsec options added for integration with AT&T ipsec tunnels 0.5.0.2 release 1. Improved IPMI general response time. 2. Fixed IPMI tool sdr on different host kernel. 3. Modified version of host ipmitool is still required, as there's a outstanding issue when transmitting I2C messages larger than 32 bytes. 4. Now Fan controllers both version of hardwares are supported. 5. Currently, the host needs to be up during uBMC start up, otherwise the CPU temperature may be missing. 6. Fixed voltages sensor values 8. Fixed upgrade via CLI 0.5.0.1 release 1804 release for AT&T 1. For initial installation, see attached SD card installation guide. 2. There are some debug messages print out on the serial console when testing ipmi SDR functionatliy, due to some timing issue, this currently can't be turned off. This will be improved in the next release. The speed of IPMI ssif is a bit slow, we are looking to improve it in the next release 3. management port for uBMC is not working, but is working for the host. 4. Currently no vlan is configured for the onboard switch, vecpe host and the ubmc inband port are on the same vlan. 5. CLI commands are not finalized, and some of the disabled command are subject to change. Next release will prefer the no command. 6. During upgrade, after flashing and reboot, user may see a 502 bad gateway page, it can be safely ignored. 7. During uBMC booting, the serial console of uBMC will be shown. The console will be switched to the vecpe host after uBMC startup ok. 8. Use ctrl+X to switch between host console and ubmc console